On Line Catalog
The Line Insulator
Wood post, Round wood post, Metal t-Post, Pipe post, Fiberglass
posts, Rebars, Trees, and T-Post-Guard sleeves over T posts.
Our line insulator and Block tensioner are designed to fit them all.
(Wood posts and t-posts
have to be purchased locally).
The design of the HorseGuard line insulator was inspired by the tuning peg that tightens
the strings on a cello, it is easy and fast to install: just turn the 2 pegs and the tape will be
secured into place. Thanks to the precut holes at each end, the insulator slides onto 1/2 inch
round fiberglass stakes.
| 1 - Once it has been
attached onto the
postwhich can be
wood, pipe, fiberglass
or T.Post.
|
2 - Position the
tape on it. |
3 - Close the cap
and screw in the
bottom. |
4 - Then firmly
screw in the other
peg but do not
over tighten. |
To resist perfectly to the mechanical friction due to the force of the winds the electric
tape must tightly be blocked into insulators, firmly squeezed between the rounded caps
that will protect the stainless steel threads from being damaged over time....
In case you need extra screwing pegs,
order a wheel of 14 rounded ones that can be tightened with a coin.
Be aware of some insulators designs that can pinch the tape and cut it over time and your
horses will know before you that the ´zappingª has become very weak.
HorseGuard line insulator fits any postsom.
Adapted itself to a variety of fence post types : Wood post, Round wood post, Metal t-Post,
Pipe post, Fiberglass posts, Rebars, Trees.
|
Attach it on a T-post or pipe post
with wire, or straps.
Onto a wood post with screw at
each end. However, these posts
have to be strong enough to resist
to the tension which the whole
fence is going to make them hold,
because all the tension of the tape
is at the extremities of fence, in the
doors and in the angles.
|
To fix the line insulator to the post
|
On wood posts
with wood screws.
#8X
|
|
Close the cap and
screw in the bottom.
The tape is strongly
maintained by the
Insulator.
#8bl
|
| 8bl | Line Post Insulator (black) | | $ 1.00 | |
 |
| 8X | Wood Screws (200) | | $ 7.40 | |
|
| VN | 14 screws for 8bl line insulator | | $ 2.20 | |
|
On square, round, metal T-posts with wires or polyamide straps.
| 56B | Polyamide Straps (100) | | $ 17.60 | |
|
| 56T | Steel Wire ties (100) | | $ 10.70 | |
|
| BT150 | Belt for trees | | $ 1.00 | |
|
#8bl
In black only.
To respect trees, with a belt
(1,50m long). #BT150 #BT150
|
On fiberglass stakes
| 1. Longer end down. |
2. Tap it down firmly. |
3. Detach the pegs.Set the top and screw the pegs in. |
| 7A | Fiberglass stake 1.70m (20) | | $ 90.70 |  | |
|
| 49 | Stake DRIVER | | $ 15.60 | | |
|
| 
HorseGUARD CANADA
Sandrine 1.800.817.6930 (Free Number)
